Mission Statement
Dixie Precast, Inc. has a long standing tradition of being an innovative company based on customer service. Our mission is to continue to build on our position as North America’s premier supplier to the Railroad Industry for any and all types of precast and galvanized steel signal and communication foundations and retaining wall systems.

About Us
With over forty years’ experience, Dixie Precast strives to exceed our mission statement on a daily basis. Dixie Precast designs, engineers, and manufactures all types of precast concrete and galvanized steel foundations used throughout the railroad industry. In addition to our line of foundations, Dixie Precast also offers both galvanized steel and precast concrete retaining wall systems. All of our products offer labor and material cost savings while meeting or exceeding current AREMA Standards.

Company History
Dixie Precast, Inc. was established in 1962 as a manufacturer of architectural and structural precast concrete. After ten years in business, Dixie Precast, at the request of Southern Railway (predecessor of present day Norfolk Southern), developed a line of precast concrete foundations for railroad signals. The foundations that were found to be of a higher quality than other available products. Due to the quality workmanship and economical cost, by 1975, Dixie was the sole supplier to Southern Railway and the Seaboard Coast Line (predecessor of CSX). Dixie quickly became the sole foundation supplier to Conrail system. We were the only foundation supplier to earn the Conrail Certified Quality Supplier Program certification.

In 1982, Dixie Precast developed a revolutionary design for a “low profile” Foundation. This design was reviewed and established as the standard design by the Association of American Railroads.

Dixie Precast currently supplies to all Class 1’s throughout the United States and Canada. Our products are utilized on many Short Lines as well as numerous Light Rail and Transit Agencies throughout North America. In addition, our foundation design has been proven as an effective solution for projects under the governance of the U.S. Department of Defense and the U.S. Department of Homeland Security.

Directions

Directions from I20 East

• Take Exit 44 (Thornton Rd)
• Turn Left
• Go 9 miles to Richard Sailors Parkway
• Turn Right
• Go 4 miles to Anderson Farm Road
• Turn Right
• Take a Right on to Ewing Road at the 3-Way stop
• Go ¼ mile, cross concrete bridge
• Angelette Drive is the next street on the Right.
• Dixie Precast is the first business on the Right.
• Please check in at the front office when you first arrive.

Directions from I20 West

• Take Exit 44 (Thornton Rd)
• Turn Right
• Go 9 miles to Richard Sailors Parkway
• Turn Right
• Go 4 miles to Anderson Farm Road
• Turn Right
• Take a Right on to Ewing Road at the 3-Way stop
• Go ¼ mile, cross concrete bridge
• Angelette Drive is the next street on the Right.
• Dixie Precast is the first business on the Right.
• Please check in at the front office when you first arrive.

Directions from I75 South (North of 285)

• Take Exit 269 (Barrett Parkway)
• Turn Right
• Go 11-12 miles to Powder Springs Road
• Turn Right & get in the far left lane
• Turn Left at the first light (Anderson Farm Road)
• Take a Right on to Ewing Road at the 3-Way stop
• Go ¼ mile, cross concrete bridge
• Angelette Drive is the next street on the Right.
• Dixie Precast is the first business on the Right.
• Please check in at the front office when you first arrive.

Directions from I285 (going North)

• Take Exit 15 (South Cobb Drive)
• Take Left back over interstate
• Go 1¼ miles to East-West Connector
• Turn Left
• Go 8¼ miles to Powder Springs Road
• Turn Left from the far left lane
• Turn Left at the first light (Anderson Farm Road)
• Take a Right on to Ewing Road at the 3-Way stop
• Go ¼ mile, cross concrete bridge
• Angelette Drive is the next street on the Right.
• Dixie Precast is the first business on the Right.
• Please check in at the front office when you first arrive.

Directions from I285 (going West)

• Take Exit 15 (South Cobb Drive)
• Turn Right
• Go 1¼ miles to East-West Connector
• Turn Left
• Go 8¼ miles to Powder Springs Road
• Turn Left from the far left lane
• Turn Left at the first light (Anderson Farm Road)
• Take a Right on to Ewing Road at the 3-Way stop
• Go ¼ mile, cross concrete bridge
• Angelette Drive is the next street on the Right.
• Dixie Precast is the first business on the Right.
• Please check in at the front office when you first arrive.